扫描IP段或连接OTG机箱/WIFI scanning Or OTG
Posted: Tue Nov 26, 2024 10:35 am
准备工作:先确认手机和电脑连接同一个路由器 [局域网互通] Preparation: Make sure your phone and computer are connected to the same router
1.点击 来喜 扫描WIFI ADB 按钮.1.Click the Laixi Scan WIFI ADB button.
- wifiscan_chs.png (22.57 KiB) Viewed 142 times
- wifiscan_en.png (23.99 KiB) Viewed 142 times
2. 打开来喜APP查看IP(也可以通过手机的WIFI连接里查看手机IP)2. Open Laixi APP to check the IP (you can also check the IP of your cell phone through the WIFI connection of your cell phone).
- findwifiip_chs.png (186.08 KiB) Viewed 142 times
- findwifiip_en.png (191.28 KiB) Viewed 142 times
3.在扫描WIFI界面填入手机WIFI里的IP段 如:192.168.0.1 - 192.168.0.2553.Fill in the WIFI scanning screen with the IP address of your cell phone's WIFI. example:192.168.0.1 - 192.168.0.255
- scanip_chs.jpg (40.38 KiB) Viewed 142 times
- scanip_en.jpg (44.02 KiB) Viewed 142 times
Special Note: The phone needs to have WIFI ADB debugging enabled in order to connect and scan wirelessly
通常情况下,安卓是默认关闭 WIFI ADB调试的,只能通过USB模式转换成WIFI无线模式 详见:[如何将USB模式转无线模式].
Usually, Android is the default off WIFI ADB debugging, can only be converted to WIFI wireless mode through the USB mode For more information:
[USB to WIFI mode]
刷一些第三方的刷机包(ROM)有开机自动会打开WIFI ADB功能.
ome third-party packages (ROMs) have the WIFI ADB function turned on automatically..
OTG或WIFI连接模式 连接数量是不受电脑主板限制的
OTG or WIFI connection mode The number of connections is not limited by the computer's motherboard.
但受到路由器性能的限制,连接数量超过20台容易频繁掉线。推荐使用软路由设备,能支持几百台手机没什么问题
However, due to the limitation of router performance, the number of connections over 20 is easy to drop frequently. It is recommended to use a soft router device, which can support hundreds of cell phones without any problem.